Home > Wachs Tooling

SDB Beveler and EP 424 End Prep Tooling

Genuine Wachs Tooling Logo

E.H. Wachs Genuine End Prep Tooling is the best choice to maintain the peak performance of our I.D. mounted end prep machine tools. All tooling on this chart is interchangeable among Wachs SpeedPrep SDB 206, SDB 412 and EP 424 models. It’s designed to deliver precision bevels and counterbores, and consistent single pointing and flange facing results.

All Genuine Wachs Tooling is manufactured from premium tool steels with exclusive designs, tested to the highest standards in the industry. Listed below is commonly used tooling for typical end prep applications. If you have a tooling application not shown please contact the factory to speak with one of our technical sales representatives for assistance.

Image Description Application Part #
Form Tool Bevel Insert Holder Kit Description: Form Tool Bevel Insert Holder Kit Application:

For completing facing and beveling of pipe with a 37.5º angle, both standard and J-prep; requires cutting tool sold separately.
Includes:

  • Low Range Holder ID 56-708-01
  • High Range Facing Insert Holder ID 56-708-02
  • 37.5º Bevel Insert Holder 56-709-03
 Part #: 56-710-01


30º Form Tool Bevel Insert Holder Description: 30º Form Tool Bevel Insert Holder Application:

For beveling pipe; requires cutting tool insert sold separately
Includes: holder, two insert screws & wrench.

 Part #: 56-709-02


37.5º Form Tool Bevel Insert Holder Description: 37.5º Form Tool Bevel Insert Holder Application:

For beveling pipe; requires cutting tool insert sold separately
Includes: holder, two insert screws & wrench.

 Part #: 56-709-03


HSS Form Tool Insert for pipe cutting Description: HSS Form Tool Insert for pipe cutting Application:

Insert for facing & beveling, double sided.

Most materials up to 32 RC hardness.

 Part #: 56-711-01


Carbide Form Tool for cutting Description: Carbide Form Tool for cutting Application:

Insert for facing & beveling, double sided.

Materials harder than 32 RC.

 Part #: 56-712-01


HSS J-Prep Bevel Form Tool Description: HSS J-Prep Bevel Form Tool Application:

Radius 3/32 “J” bevel insert, double sided.

Most materials up to 32 RC hardness.

 Part #: 56-711-02


Carbide J-Prep Bevel Form Tool Description: Carbide J-Prep Bevel Form Tool Application:

Radius 3/32 “J” bevel insert, double sided.

Materials harder than 32 RC.

 Part #: 56-712-02


Low Range 4:1 Taper Counterbore Tool Description: Low Range 4:1 Taper Counterbore Tool Application:

Most pipes. Maximum counterbore depth: 1 1/8in (28.5mm)

 Part #: 56-705-01


Medium Range 4:1 Taper Counterbore Tool Description: Medium Range 4:1 Taper Counterbore Tool Application:

Most pipes. Maximum counterbore depth: 1 1/8in (28.5mm)

 Part #: 56-705-02


High Range 4:1 Taper Counterbore Tool Description: High Range 4:1 Taper Counterbore Tool Application:

Most pipes. Maximum counterbore depth: 1 1/8in (28.5mm)

 Part #: 56-705-03


Standard 3/8in x 3/8in (9.5mm x 9.5mm) High Speed Tool Bit Description: Standard 3/8in x 3/8in (9.5mm x 9.5mm) High Speed Tool Bit Application:

Most pipes. Use with 56-424-00 and 56-424-01

 Part #: 56-713-00


Low Range 10º ID Deburring Tool Description: Low Range 10º ID Deburring Tool Application:

10º ID taper, most pipes

 Part #: 56-702-01


Medium Range 10º ID Deburring Tool Description: Medium Range 10º ID Deburring Tool Application:

10º ID taper, most pipes.
Used for ID chamfering.

 Part #: 56-702-02


High Range 10º ID Deburring Tool Description: High Range 10º ID Deburring Tool Application:

10º ID taper, most pipes.
Used for ID chamfering.

 Part #: 56-702-03


4:1 Counterbore Tool Kit Description: 4:1 Counterbore Tool Kit Application:

Maximum depth 3 1/8in (79.4mm)
Minimum ID 6in (152mm)
Standard tooling (EP 424 only)
Most pipes
Includes: tool insert holder 56-210-00 and 3 insert retaining screws.
Requires insert 60-700-04 sold separately

 Part #: 56-715-00


Counterbore Tooling Insert Description: Counterbore Tooling Insert Application:

Maximum depth 3 1/8in (79.4mm)
Minimum ID 6in (152mm)
Standard tooling (EP 424 only)
Most pipes
For use with 56-715-00 Tool Kit

 Part #: 60-700-04


Low Range Single Point Tool Holder Description: Low Range Single Point Tool Holder Application:

Most materials less than 32 RC hardness
Requires tooling insert 52-701-01 sold separately.

 Part #: 56-424-00


High Range Single Point Tool Holder Description: High Range Single Point Tool Holder Application:

Most materials less than 32 RC hardness
Requires tooling insert 52-701-01 sold separately.

 Part #: 56-424-01


HSS Single Point Tooling Insert Description: HSS Single Point Tooling Insert Application:

Single point beveling. Most materials less than 32 RC hardness. Tool Bit for single point facing, beveling
Use with 56-424-00 and 56-424-01

 Part #: 52-701-01


Single Point Flange Facing Tool Holder Kit Description: Single Point Flange Facing Tool Holder Kit Application:

Complete flange facing
Includes:

  • Low Range 56-714-03 insert tool holder
  • High Range 56-714-02 insert tool holder
  • (2) 56-710-00 tool inserts
  • (2) insert retaining screws
  • (2) screw wrenches
 Part #: 56-418-01


Single Point Flange Facing Tool Insert Description: Single Point Flange Facing Tool Insert Application:

Flange facing and record grooving
Three-tipped insert for use with 56-418-01 Holder Kit

 Part #: 56-710-00


v1.1.15